Interface_Settings
The Interface Settings screen
By default, Threat Discovery Appliance automatically detects the network speed and duplex mode for the management port (MGMT), so it is unlikely that you need to change this setting. However, if any issues with the connection arise, you can manually configure these settings.
To maximize throughput, Trend Micro recommends full-duplex mode.
Half-duplex is acceptable. However, network throughput is limited because half-duplex communication requires any computer transmitting data to wait and retransmit if a collision occurs.
Data ports used by the product can be managed from the product console by navigating to Administration > Network Interface Settings. For details, see Network Interface Settings.
To modify interface settings:
Log on to the Preconfiguration Console. The Main Menu appears.
Type 3 to select Interface Settings and press the ENTER key. The Interface settings of the Management and Data ports appear.
To change the interface settings, type 1 and press the ENTER key.
Use the space bar to change the values of the settings.
The available options are shown beneath the field settings.
Type 2 and press the ENTER key to Return to the main menu. Press the ENTER key to return to main menu.
Navigate down to 7) Log Off with Saving. Press the ENTER key to save the settings.
See also: