Device_Settings
The Device Settings screen
Modify product settings from both the Preconfiguration Console and the product console.
To modify product settings using the Preconfiguration Console:
Log on to the Preconfiguration Console. The Main Menu appears.
Type 2 to select Device Settings and press the ENTER key. The Device Settings screen appears.
Configure IP address settings.
To use dynamic IP address:
Use the space bar to change the IP address option from static to dynamic.
To use static IP address:
Use the space bar to change the IP address setting from dynamic to static.
Specify a new IP address, Subnet mask, Default gateway IP address, and Primary and Secondary DNS server IP addresses.
Change the Host name.
Navigate to the Host name option.
Specify the new host name.
(Optional) Bind the IP Address:
Navigate to the Bind IP Address option.
Specify a VLAN ID. Press the ENTER key.
Register to Trend Micro Control Manager:
Registration is optional. You can use the product console to register to Control Manager at a later time.
Use the down arrow to bring the cursor to Register to Control Manager and then use the spacebar to change the option to [yes].
Type the Control Manager server IP address in the FQDN or IP address field.
Use the spacebar to change the Enable two-way communication port forwarding option from no to yes.
Type the port number and IP address of your router or NAT device server in the Port forwarding IP address and Port forwarding port number fields. Threat Discovery Appliance uses the Port forwarding IP address and Port forwarding port number for two-way communication with Control Manager.
Configuring the NAT device is optional and depends on the network environment. For more information on NAT, refer to the Trend Micro Control Manager Administrator’s Guide.
Navigate to Return to main menu. Press the ENTER key to return to main menu.
Navigate to 7) Log Off with Saving. Press the ENTER key to save the settings.
See also: