Service Gateway CLI Commands

A list of available CLI commands for managing the Service Gateway virtual appliance.

To access the CLI, connect to VMware ESXi (either directly or through SSH) and open the Service Gateway virtual appliance. Log on to the CLI with your account credentials.

Note:

Make sure you disable the Scroll Lock key on your keyboard when using HyperTerminal.

To view basic information of the Service Gateway, such as network settings and service status, run the show command. For example, use show ipv4 address to check the network address. For a list of available commands, type show and then press the ? key.

To view a list of tasks you can perform and enable administrative commands, run the enable command. Enabling administrative commands changes the command prompt from > to #. The following table lists out the administrative commands you can use to manage the Service Gateway virtual appliance.

Command Syntax Description
configure dns ipv4 configure dns ipv4 <dns1> [dns2]

Configure IPv4 DNS settings

<dns1>: IPv4 address of the primary DNS server

[dns2]: IPv4 address of the secondary DNS server

configure dns ipv6 configure dns ipv6 <dns1> [dns2]

Configure IPv6 DNS settings

<dns1>: IPv6 address of the primary DNS server

[dns2]: IPv4 address of the secondary DNS server

configure endpoint configure endpoint <hostname>

Configure the endpoint name

<hostname>: Endpoint name or FQDN

configure ipv4 static configure ipv4 static <ip> <mask> <gateway> [vlan]

Configure the default Ethernet interface to use the static IPv4 configuration

[vlan]: VLAN ID (1-4094)

configure ipv6 static configure ipv6 static <v6ip> <v6mask> <v6gate> [vlan]

Configure the default Ethernet interface to use the static IPv6 configuration

[vlan]: VLAN ID (1-4094)

configure ntp configure ntp <ip or FQDN>

Configure the NTP server

configure password configure password

Configure the account password

configure proxy set configure proxy set <proxy type> <proxy information>

Configure the proxy server for the Service Gateway virtual appliance

configure proxy delete configure proxy delete

Delete proxy settings

connect connect

Test connection to Trend Micro Vision One

exit exit

Exit the CLI

help help

Display the CLI syntax

history history [limit]

Display the session's command history

[limit]: The number of CLI commands to display

log log collect

Upload Service Gateway debugging data to Trend Micro Vision One for troubleshooting

ping ping <address>

Check the connection to a specific address

reboot reboot [time]

Restart the Service Gateway after a specified delay or immediately

[time]: Delay in minutes

register register <regiatration_token>

Register the Service Gateway to Trend Micro Vision One

shutdown shutdown [time]

hut down the Service Gateway after a specified delay or immediately

[time]: Delay in minutes

unregister unregister

Unregister the Service Gateway from Trend Micro Vision One