Configuring Network Settings Parent topic

Use the Network Settings screen from the System Settings menu to configure VMI Public IP Address and proxy settings for Virtual Mobile Infrastructure server.
The VMI public IP address setting is required for mobile devices to access Virtual Mobile Infrastructure server from outside the network. If Secure Access is connected to a gateway or an external router, configure the IP address of the gateway or the router instead of the IP address of Secure Access. If Secure Access is not installed, keep the default settings.
If your network settings require a proxy to connect to the Internet, configure the proxy settings on Virtual Mobile Infrastructure server.

Procedure

  1. Under the VMI Public IP Address section, type the public domain name or IP address, and port number for public address.
    Note
    Note
    The default port number for public address is 443.
  2. Under the Proxy section, select Use the following proxy settings, and configure the following:
    • Host name or IP address
    • Port number
    • Proxy server authentication
      • User name
      • Password
      • Bypass proxy for these addresses
        Note
        Note
        The bypass setting only takes effect for the user workspaces, and from the next time users sign in.
  3. Type a URL in the Test address field, and then click Test Connection to verify proxy settings.
  4. Select one of the following options for Apply proxy to:
    • Server and Workspace
    • Server only
    • Workspace only
  5. Click Save.