Monitored_Networks
Establish groups of monitored networks using IP addresses to allow Threat Discovery Appliance to determine whether attacks originate from within or outside the network.
To add monitored networks:
Network Configuration > Monitored Network
Click Add. The Add Monitored Network Group screen appears.
Specify a group name.
Provide specific groups with descriptive names for easy identification of the network to which the IP address belongs. For example, use Finance network, IT network, or Administration.
Specify an IP address range in the text box. You can add a maximum of 1,000 IP address ranges.
Threat Discovery Appliance comes with a monitored network called Default, which contains the following IP address blocks reserved by the Internet Assigned Numbers Authority (IANA) for private networks:
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
If you did not remove Default, you do not need to specify these IP address blocks when adding a new monitored network.
Use a dash to specify an IP address range, such as 192.168.1.0-192.168.1.255.
Use a slash to specify the subnet mask for IP addresses, such as 192.168.1.0/255.255.255.0 or 192.168.1.0/24.
Select the Network zone of network group.
Selecting Trusted means this is a secure network and selecting Untrusted means there is a degree of doubt on the security of the network.
Click Add.
Click Save.
To remove monitored networks:
Network Configuration > Monitored Network
Select the Group Name(s) that you want to remove.
Click Delete.
See also: