Configuring SNMP Settings

Administration > SNMP Settings

Use this screen to configure the Small Network Management Protocol (SNMP) settings.

To configure the SNMP settings:

  1. Click Administration on the main menu. The drop-down menu displays

  2. Click SNMP Settings from the drop-down menu. The SNMP Settings screen displays.

  3. Select the Enable SNMP Trap check box under SNMP Trap.

  4. Type the Community name and Server IP address under SNMP Trap.

  5. Select the Enable SNMP Agent check box under SNMP Agent.

  6. Type the System location and System contact.

  7. Type a Community name to add under Accepted Community Name(s). MORE>>

    You can add up to 5 SNMP Accepted Community Names.

  8. Click Add to. The community name displays in the table.

  9. Type the IP Address to add under Trusted Network Management IP Address(es). MORE>>

    You can add up to 255 SNMP Trusted Network Management IP Addresses.

  10. Click Add to. The IP address displays in the table.

  11. Click Save.

To export the MIB file:

  1. Click Administration. The drop-down menu displays.

  2. Click SNMP Settings from the drop-down menu. The SNMP Settings screen displays.

  3. Click Export MIB file. The Save As screen displays.

  4. Click Save. Specify the location and file name.

  5. Click Save.

See also: