snmp_service

SNMP Service

Smart Protection Servers supports SNMP to provide further flexibility in monitoring the product. Configure settings and download the MIB file from the Administration > SNMP Service screen.

A brief description of the available options is below.

• Enable SNMP Service: Select to use SNMP.

• Community name: Specify an SNMP community name.

• Enable IP restriction: Select to enable IP address restriction.

• Classless Inter-Domain Routing (CIDR) is not supported for IP restriction. Prevent unauthorized access to the SNMP service by enabling IP address restriction.

• IP address: Specify an IP address for using the SNMP service to monitor Health Status.

• Subnet Mask: Specify a netmask to define the IP address range for using the SNMP service to monitor computer status.

• Smart Protection Server MIB: Click to download the Smart Protection Server MIB file.

• Save: Click to retain the settings.

• Cancel: Click to discard changes.

Configuring SNMP Service

Configure SNMP Service settings to allow SNMP managing systems to monitor Smart Protection Server status.

To configure SNMP Service:

• Administration > SNMP Service

1. Select the Enable SNMP Service check box.

2. Specify a Community name.

3. Select the Enable IP restriction check box to prevent unauthorized access to the SNMP service. Classless Inter-Domain Routing (CIDR) is not supported for IP restriction.

4. Specify an IP address.

5. Specify a subnet mask.

6. Click Save.

See also:

• Downloading the MIB file