Network VirusWall Enforcer is a standalone product and you do not need to register the device to Control Manager™. All features are managed using the Network VirusWall Enforcer Preconfiguration console and web console. Before registering Network VirusWall Enforcer to a Control Manager server, you must ensure that both the device and the Control Manager server belong to the same network segment.
To register Network VirusWall Enforcer to Control Manager:
Log on to the Preconfiguration console.
On the Main Menu, select Register to trend Micro Control Manager and press ENTER.
Use the spacebar to change the option to yes.
Type the Control Manager server IP address next to FQDN or IP address.
If you use a NAT device, type the NAT device’s IP address and port number.
Use the down arrow to bring the cursor down to Return to Main menu and press ENTER.
On the Main Menu, select Save and Log Off and press ENTER. A confirmation screen displays.
Ensure the cursor is on OK and press ENTER.
From the Control Manager management console Main Menu, click Products.
On the left-most menu, select Managed Products from the list and then click Go.
Check to see that Network VirusWall Enforcer displays.
Refer to the Trend Micro Control Manager Administrator’s Guide for more information about managing products in Control Manager.