Use Multiple DCS Servers

Administration > Register to DCS

When there are multiple DCS servers in the DCS server list, IWSVA will send cleanup requests to DCS servers via round robin. If IWSVA detects that a DCS server is down, it will forward the cleanup request to the next DCS server in the DCS server list.

• Notes:
  
  1. For IWSVA to work with multiple DCS servers, all redirection requests need to be sent to the first DCS server in the DCS server list. If that server is down, re-direction will be skipped.
  
  2. If you use HTTPS to connect to the IWSVA console and want to set up work with DCS, be sure to add the secure port (typically 8443) to the HTTPS port list: HTTP > Configuration > Internet Access Control | HTTPS Ports tab. (Otherwise, IWSVA will not be able to redirect affected clients to the DCS server).
   

For each DCS server, enter the IP address (or host name) and the port IWSVA will connect to. The default DCS communications port is 80. DCS does not support HTTPS connections.

• To remove, or un-register a DCS server from IWSVA, click the trash bin icon next to the server from which you want to disconnect.

See also

• Example DCS Message

• HTTPS Ports