Adding VLAN Subinterfaces Parent topic

Important
Important
Each VLAN subinterface VLAN ID must match the VLAN ID added by the IEEE 802.1Q-compliant router. The VLAN ID can be any number between 1 and 4094 (0 and 4095 are reserved). Configure each L3 VLAN subinterface with a unique IP address and netmask.
Add VLAN subinterfaces to the physical interface that receives VLAN-tagged packets.

Procedure

  1. To view all Deep Edge network interfaces, go to Network → Interfaces
  2. Click the VLAN add configuration icon (add_vlan.jpg) in the Action column.
  3. Specify the following information:
    Option Description
    Name Name the VLAN subinterface.
    Type L2 VLAN or L3 VLAN displays automatically, depending upon the parent interface.
    Mode For L3 interfaces, use the Mode drop-down list to set whether the subinterface uses a dynamic or static address.
    VLAN ID Specify the VLAN ID that matches the VLAN ID of the packets received by this VLAN subinterface. You cannot change the VLAN ID of an existing VLAN subinterface. The VLAN ID can be any number between 1 and 4094 and must match the VLAN ID added by the IEEE 802.1Q-compliant router or switch connected to the VLAN subinterface.
  4. Click Apply.