Adding VLAN Subinterfaces Parent topic

Important
Important
Each VLAN subinterface VLAN ID must match the VLAN ID added by the IEEE 802.1Q-compliant router. The VLAN ID can be any number between 1 and 4094 (0 and 4095 are reserved). Configure each L3 VLAN subinterface with a unique IP address and netmask.
VLAN subinterfaces to the physical interface that receives VLAN-tagged packets.

Procedure

  1. Go to Network → Interfaces in the Deep Edge web console to view all Deep Edge network interfaces.
  2. Click the VLAN add configuration icon (add_vlan.jpg) in the Actions column.
  3. Specify the following information:
    Option Description
    Name Name the VLAN subinterface
    Type L2 VLAN or L3 VLAN displays automatically, depending upon the parent interface
    Mode Select the type of addressing mode as DHCP or Static from the drop-down list box
    VLAN ID Specify the VLAN ID that matches the VLAN ID of the packets received by this VLAN subinterface. Administrators cannot change the VLAN ID of an existing VLAN subinterface. The VLAN ID can be any number between 1 and 4094 and must match the VLAN ID added by the IEEE 802.1Q-compliant router or switch connected to the VLAN subinterface.
  4. Click Apply.