t_modify_dhcp_services_settings

Modifying DHCP Service Settings

To modify DHCP services and settings:

1. Go to Network > Services > DHCP.

2. Click the name of the DHCP service to be modified.

3. Modify the parameters associated with the DHCP service:

• IP address/bitmask—The IP address/bitmask leased from the DHCP server.

• Enable/disable—Click the icon to switch between enabled (green/on) or disabled (red/off) DHCP services.

• Preferred DNS—Enter the IP address of the preferred DNS server

• Gateway—Enter IP address of the gateway defined by the DHCP server

• IP address range from and to—Enter the range of IP addresses to create the IP Pool to which the DHCP configuration applies.

4. Change the advanced settings if needed:

• Lease time—Adjust the time and date when the leased IP address and netmask is no longer valid.

• Static mapping—Check check box to enable and click Add static mapping

• Add the Mac Address, IP address, and select either the Cancel or Submit action.

5. Click Apply.

6. Verify the settings changed at Network > Services > DHCP.

See also:

• Interface Configuration for DHCP

• DHCP Advanced Settings: Static Mapping and Lease Time

• Viewing DHCP Services and Settings