Procedure

1. Using an RS-232 serial cable, connect the serial port of the Deep Discovery Inspector appliance to the serial port on a computer.
2. On the computer, open a serial communication application (HyperTerminal).
3. Type the following values if you are accessing the Preconfiguration Console for the first time:
   • Bits per second: 115200
   • Data bits: 8
   • Parity: None
   • Stop bits: 1
   • Flow control: None

   Note To enter data when using HyperTerminal, disable the scroll lock function on your keyboard.

4. When the Preconfiguration Console screen appears, type the default password admin and press ENTER twice.