Format Setting
|
Description
|
||
---|---|---|---|
Appliance Host Name Format
|
The host name can contain alphanumeric characters and dashes ("A-Z", "a-z",
"0-9", "-").
|
||
Dynamic IP Address
|
Obtain a dynamic IP address from a DHCP server on your network. Verify that the
Preconfiguration Console has been changed accordingly. For details, see the
Deep Discovery Inspector
5.7 SP3 Installation and
Deployment Guide.
|
||
Static IP Address Format
|
IP addresses must be in the format: XXX.XXX.XXX.XXX, where X is a decimal value
between 0 and 255.
The IPv4 address cannot be in any of the following formats:
The IPv6 address cannot be in any of the following formats:
|
||
Subnet Mask Format
|
The binary format of a subnet mask starts with a sequence of continuous 1s and
ends with a sequence of continuous 0s.
IPv4 address subnet mask example:
|
||
Subnet Prefix Format
|
IPv6 addresses convert groups of bits into groups of hexadecimal digits,
separated by colons. The high-order bits on the left of an IPv6 address specify
the network, the rest specify particular addresses in that network. All the
addresses in one network have the same first N bits, called the "prefix".
Use "/N" to denote a prefix N bits long.
IPv6 address subnet prefix example:
This example means all addresses where the first 32 bits are
2001:db8.
|
||
Default Gateway Address Format
|
The gateway must be in the same subnet as the IP address.
|
||
DNS
|
IPv4 or IPv6 address
|